Podrobno

Effect of silicon and oxygen co-doping on structure and properties of non‑hydrogenated amorphous carbon
ID Naseer, Abqaat (Avtor), ID Evaristo, Manuel (Avtor), ID Kalin, Mitjan (Avtor), ID Cavaleiro, Albano (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (3,27 MB)
MD5: 02039D0599F8062F8532C0E90C70774A
URLURL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0257897224012489 Povezava se odpre v novem oknu

Izvleček
Introducing silicon and oxygen dopants into amorphous carbon (a-C) is known to improve its structural and functional properties, making it suitable for specialized applications. Yet, given the limited compositional control offered by the complex deposition methods, the relationship between dopant concentration and coating properties is not well understood. This study systematically investigates the effect of increasing silicon (0 – 30 at.%) and oxygen (0 – 20 at.%) content on structure, hardness, reduced modulus, and surface wettability of non‑hydrogenated a-C coatings, deposited by magnetron sputtering. The coating composition was controlled by adjusting the power applied to the silicon target and the oxygen gas flow rate during the sputtering process. Our results indicate that with increasing silicon content, the sp3/sp2 fraction, hardness, reduced modulus, and surface energy progressively increased. Moreover, while high oxygen content, in general, promoted graphitization, leading to loss of mechanical properties, it also helped in reducing surface energy by terminating silicon bonds. Nonetheless, it was observed that the otherwise detrimental effect of oxygen doping on mechanical properties could be avoided by maintaining a low concentration of oxygen (∼ 10 at.%), combined with high silicon content (> 18 at.%). This work establishes optimized doping conditions for tailoring the structure and properties of silicon and oxygen co-doped non‑hydrogenated a-C coatings, potentially extending their usage in protective and functional applications.

Jezik:Angleški jezik
Ključne besede:amorphous carbon, silicon doping, oxygen doping, a-C:Si:O, hardness, surface wettability
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2025
Št. strani:11 str.
Številčenje:Vol. 496, art. 131616
PID:20.500.12556/RUL-165590 Povezava se odpre v novem oknu
UDK:621.7.015
ISSN pri članku:0257-8972
DOI:10.1016/j.surfcoat.2024.131616 Povezava se odpre v novem oknu
COBISS.SI-ID:218270211 Povezava se odpre v novem oknu
Datum objave v RUL:09.12.2024
Število ogledov:179
Število prenosov:684
Metapodatki:XML DC-XML DC-RDF
:
NASEER, Abqaat, EVARISTO, Manuel, KALIN, Mitjan in CAVALEIRO, Albano, 2025, Effect of silicon and oxygen co-doping on structure and properties of non‑hydrogenated amorphous carbon. Surface & coatings technology [na spletu]. 2025. Vol. 496,  131616. [Dostopano 14 april 2025]. DOI 10.1016/j.surfcoat.2024.131616. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=165590
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Surface & coatings technology
Skrajšan naslov:Surf. coat. technol.
Založnik:Elsevier Sequoia
ISSN:0257-8972
COBISS.SI-ID:3084815 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
Opis:Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.

Projekti

Financer:Drugi - Drug financer ali več financerjev
Program financ.:H2020 Marie Skłodowska-Curie Actions (MSCA)
Številka projekta:860246
Naslov:European Joint Doctorate (EJD) project – GreenTRIBOS

Financer:FCT - Fundação para a Ciência e a Tecnologia, I.P.
Številka projekta:00285/2020

Financer:FCT - Fundação para a Ciência e a Tecnologia, I.P.
Program financ.:6817 - DCRRNI ID
Številka projekta:LA/P/0112/2020
Naslov:Advanced Production and Intelligent Systems
Akronim:ARISE

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P2-0231
Naslov:Tribologija

Podobna dela

Podobna dela v RUL:
  1. Kvantne pike na osnovi ogljika za tehnologijo zelenega mazanja
  2. Controlling the stainless steel surface wettability by nanosecond direct laser texturing at high fluences
  3. Primerjava zgradbe in lastnosti keramike Al2O3 in ZrO2
  4. Zgradba in lastnosti lesa balze izbranega slovenskega trgovca
  5. Funkcionalizacija površin z lasersko povzročenimi površinskimi strukturami
Podobna dela v drugih slovenskih zbirkah:
  1. Effect of Ti and S content on the properties and machinability of low-carbon ferritic–pearlitic steel
  2. Kinetics of surface wettability of aromatic polymers (PET, PS, PEEK, and PPS) upon treatment with neutral oxygen atoms from non-equilibrium oxygen plasma
  3. Paramagnetic intrinsic point defects in alkali phosphate glasses
  4. Optimizing waste material integration: investigating the effect of non-thermal oxygen plasma surface treatment of crumb rubber to improve compatibility with closed-cell polyurethane foam
  5. Learning from nature

Nazaj