Razvoj naprave za navijanje statorjev sodobnih elektromotorjev

Trček, Martin (avtor), Zupan, Samo (mentor), Krašna, Simon (komentor)

V magistrski nalogi smo zasnovali prototip naprave za navijanje statorskih zob. Najprej smo predstavili stanje obstoječe tehnologije na trgu. Nato smo opisali teorijo, ki zajema simulacijo togih teles v programu Hexagon Adams, opis bolj naprednih komponent naprave in pa DFMEA (Design Failure Mode and Effect Analysis) analizo. Sledi podroben opis zasnovane naprave in DFMEA analiza najbolj kritičnih funkcij. Po zasnovi smo izdelali fizičen model verige in opravili simulacijo teka verige. Na koncu smo rezultate zasnove, simulacije in meritev komentirali in opravili stroškovno analizo. Podali smo tudi predloge za izboljšave in nadaljnje delo.

• Jezik: Slovenski jezik
• Ključne besede: statorski zobje, navijanje, DFMEA analiza, simulacija togih teles, stroškovna analiza
• Vrsta gradiva: Magistrsko delo/naloga
• Tipologija: 2.09 - Magistrsko delo
• Organizacija: FS - Fakulteta za strojništvo
• Leto izida: 2024
• Št. strani: XX, 61 str.
• PID: 20.500.12556/RUL-165110
• UDK: 004.414.23:681.5(043.2)
• COBISS.SI-ID: 218964483
• Datum objave v RUL: 23.11.2024

TRČEK, Martin, 2024, Razvoj naprave za navijanje statorjev sodobnih elektromotorjev [na spletu]. Magistrsko delo. [Dostopano 21 april 2025]. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=165110

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Development of a winding machine for stators of modern electric motors

Izvleček

In the master thesis, we designed a prototype of a stator tooth winding device. First, we presented the state of the existing technology on the market. Then we described the theory, which includes rigid body simulation in program Hexagon Adams, a description of the more advanced components of the device and a DFMEA (Design Failure Mode and Effect Analysis) analysis. This is followed by a detailed description of the designed device and a DFMEA analysis of the most critical functions. After the design, a physical model of the chain has been built and a simulation of the chain run has been carried out. Finally, we commented on the design, simulation and measurement results and performed a cost analysis. We also made suggestions for improvements and further work.

• Ključne besede: stator teeth, winding, DFMEA analysis, rigid body simulation, cost analysis