Effect of lubricated liquid carbon dioxide (LCO2 + MQL) on grinding of AISI 4140 steel

Kareepadath Santhosh, Deepa (avtor), Hoier, Philipp (avtor), Pušavec, Franci (avtor), Krajnik, Peter (avtor)

This paper investigates the potential of utilizing lubricated liquid carbon dioxide (LCO2 + MQL) as an alternative to conventional flood cooling in grinding operations. This approach could facilitate a transition towards fossil-free production, which is a significant challenge in industry. The alternative cooling–lubrication method relies on pre-mixed LCO2 and oil and a single-channel minimum quantity lubrication (MQL) delivery method, which has already demonstrated potential in machining with geometrically defined cutting edges. However, this method has been less explored in grinding. This study primarily evaluates the grindability of AISI 4140 steel, examining surface roughness, residual stresses, microhardness, grinding forces, and specific energy for different cooling–lubrication methods. The results indicate that LCO2 + MQL is capable of attaining surface roughness and microhardness that is comparable to that of conventional flood cooling, especially in the case of less aggressive, finish grinding. Nevertheless, the presence of higher tensile residual stresses in rough grinding suggests that the cooling capability may be insufficient. While the primary objective was to evaluate the technological viability of LCO2 + MQL in terms of grindability, a supplementary cost-effectiveness analysis (CEA) was also conducted to assess the economic feasibility of LCO2 + MQL in comparison to conventional flood cooling. The CEA showed that the costs of both the cooling–lubrication methods are very similar. In conclusion, this study offers insights into the technological and economic viability of LCO2 + MQL as a sustainable cooling–lubrication method for industrial grinding processes.

• Jezik: Angleški jezik
• Ključne besede: grinding, arbon dioxide, cryogenics, cooling, MQL, lubrication
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: 16 str.
• Številčenje: Vol. 8, no. 5, art. 230
• PID: 20.500.12556/RUL-163928
• UDK: 621.7
• ISSN pri članku: 2504-4494
• DOI: 10.3390/jmmp8050230
• COBISS.SI-ID: 211401475
• Datum objave v RUL: 14.10.2024

KAREEPADATH SANTHOSH, Deepa, HOIER, Philipp, PUŠAVEC, Franci in KRAJNIK, Peter, 2024, Effect of lubricated liquid carbon dioxide (LCO2 + MQL) on grinding of AISI 4140 steel. Journal of manufacturing and materials processing [na spletu]. 2024. Vol. 8, no. 5,  230. [Dostopano 21 april 2025]. DOI 10.3390/jmmp8050230. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=163928

Gradivo je del revije

• Naslov: Journal of manufacturing and materials processing
• Skrajšan naslov: J. manuf. mater. process.
• Založnik: MDPI
• ISSN: 2504-4494
• COBISS.SI-ID: 21628182

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: brušenje, ogljikov dioksid, kriogenika, hlajenje, MQL, mazanje