izpis_h1_title_alt

Analysis and research on energy consumption of a non-contact high-efficiency tunnel de-icing device
ID Yan, Hongwei (Avtor), ID Qin, Chang (Avtor), ID Niu, Hailong (Avtor), ID Wang, Guorui (Avtor), ID Zhao, Pengyang (Avtor), ID He, Bolong (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (2,48 MB)
MD5: 7A411D6F22878F914638E5CF80694EDA
URLURL - Izvorni URL, za dostop obiščite https://www.sv-jme.eu/?ns_articles_pdf=/ns_articles/files/ojs30/764/66cc34b233cc8.pdf&id=7038 Povezava se odpre v novem oknu

Izvleček
In this paper, a laser deicing device for tunnel is designed to solve the inconvenience of deicing the tunnel roof wall. First of all, Solidworks software was used to create a 3D model of the laser deicing device, namely the track module, the base platform, and the work platform. Then, ANSYS simulation software is used to simulate the process of laser deicing. When the initial temperature of icicle is -5℃, -10℃, -15℃ and -20℃, the distance between laser and icicle is 1.5m, 2m, 2.5m and 3m, and the wind speed is 2m/s, 3m/s, 4m/s and 5m/s, respectively. The depth of 200s of laser irradiation and the time of full penetration were simulated under three variables. It is concluded that the higher the initial temperature, the closer the distance and the smaller the wind speed, the lower the deicing energy consumption. Finally, the experiment results are consistent with the simulation results, which further verifies the accuracy of the simulation. The laser deicing detection device studied in this paper provides a certain theoretical basis and reference value for the application and development of intelligent deicing equipment in tunnels.

Jezik:Angleški jezik
Ključne besede:tunnel engineering, laser de-icing, energy consumption analysis, simulation analysis
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2024
Št. strani:Str. 325-341
Številčenje:Vol. 70, no. 7/8
PID:20.500.12556/RUL-163465 Povezava se odpre v novem oknu
UDK:531/533
ISSN pri članku:0039-2480
DOI:10.5545/sv-jme.2023.764 Povezava se odpre v novem oknu
COBISS.SI-ID:210398467 Povezava se odpre v novem oknu
Datum objave v RUL:07.10.2024
Število ogledov:82
Število prenosov:634
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:0039-2480
COBISS.SI-ID:762116 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Analiza rabe energije naprave za visokoučinkovito brezkontaktno odstranjevanje ledu v predorih
Ključne besede:tunelska tehnika, lasersko odstranjevanje ledu, analiza rabe energije, simulacijska analiza

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj