An investigation into the grindability of additively manufactured 42CrMo4 steel

Hoier, Philipp (avtor), Kareepadath Santhosh, Deepa (avtor), Hryha, Eduard (avtor), Krajnik, Peter (avtor)

This study investigates post-processing of additively manufactured (AM) low-alloy 42CrMo4 steel (AISI 4140) produced by powder bed fusion – laser beam (PBF-LB). While the PBF-LB process produces tempered martensite by in-situ heat-treatment, resulting in superior mechanical properties, finishing by grinding remains critical for use in precision components such as automotive gears. The grindability of the AM material is compared to conventionally produced steel and reveals comparable results to most of the grindability criteria tested. However, higher wheel wear is observed when grinding the AM material. This is likely due to the lack of machinability-enhancing inclusion treatment common in conventional steelmaking.

• Jezik: Angleški jezik
• Ključne besede: grinding, grindability, additive manufacturing
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: Str. 257-260
• Številčenje: Vol. 73, iss. 1
• PID: 20.500.12556/RUL-160214
• UDK: 621.926:621.742.53
• ISSN pri članku: 0007-8506
• DOI: 10.1016/j.cirp.2024.04.039
• COBISS.SI-ID: 198954755
• Datum objave v RUL: 23.08.2024

HOIER, Philipp, KAREEPADATH SANTHOSH, Deepa, HRYHA, Eduard in KRAJNIK, Peter, 2024, An investigation into the grindability of additively manufactured 42CrMo4 steel. CIRP annals [na spletu]. 2024. Vol. 73, no. 1, p. 257–260. [Dostopano 21 april 2025]. DOI 10.1016/j.cirp.2024.04.039. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=160214

Gradivo je del revije

• Naslov: CIRP annals
• Skrajšan naslov: CIRP ann.
• Založnik: Technische Rundschau, Hallwag Verlag, Colibri, Elsevier
• ISSN: 0007-8506
• COBISS.SI-ID: 170267

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: brušenje, brusilnost, aditivna proizvodnja

Projekti

• Financer: Saint-Gobain Abrasives

• Financer: MCR - Chalmers Centre for Metal Cutting Research