Multi-response optimization of GTAW process parameters in terms of energy efficiency and quality

Van, An-Le (avtor), Nguyen, Thai-Chung (avtor), Bui, Huu-Toan (avtor), Dang, Xuan-Ba (avtor), Nguyen, Trung Thanh (avtor)

This work optimizes the current (I), voltage (V), flow rate (F), and arc gap (G) of the gas tungsten arc welding (GTAW) of the Ti40A titanium alloy to decrease the heat input (HI) and improve the ultimate tensile strength (TS) and micro-hardness (MH). The radial basis function network (RBFN) was utilized to present performance measures, while weighted principal component analysis (WPCA) and an adaptive non-dominated sorting genetic algorithm II (ANSGA-II) were applied to estimate the weights and generate optimal points. The evaluation via an area-based method of ranking (EAMR) was employed to determine the best solution. The results indicated that the optimal I, V, F, and G are 89 A, 23 V, 20 L/min, and 1.5 mm, respectively. The improvements in the TS and MH were 1.2 % and 19.8 %, respectively, while the HI was saved by 18.4 %. The RBFN models provided acceptable accuracy for prediction purposes. The ANSGA-II provides better optimality than the conventional NSGA-II. The HI, TS, and MH of the practical GTAW Ti40A could be enhanced using optimality. The optimization method could be utilized to deal with optimization problems for not only other GTAW operations but also other machining processes.

• Jezik: Angleški jezik
• Ključne besede: GTAW, heat input, ultimate tensile strength, micro-hardness, radial basis function network
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: Str. 259-269
• Številčenje: Vol. 70, no. 5/6
• PID: 20.500.12556/RUL-159951
• UDK: 621.791
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2023.890
• COBISS.SI-ID: 203127811
• Datum objave v RUL: 01.08.2024

VAN, An-Le, NGUYEN, Thai-Chung, BUI, Huu-Toan, DANG, Xuan-Ba in NGUYEN, Trung Thanh, 2024, Multi-response optimization of GTAW process parameters in terms of energy efficiency and quality. Strojniški vestnik [na spletu]. 2024. Vol. 70, no. 5/6, p. 259–269. [Dostopano 7 april 2025]. DOI 10.5545/sv-jme.2023.890. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=159951

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Večkriterijska optimizacija parametrov procesa TIG varjenja za energijsko učinkovitost in kakovost
• Ključne besede: varjenje TIG, vnos toplote, porušitvena natezna trdnost, mikrotrdota, omrežje radialnih baznih funkcij, optimizacija