The microstructural reconstruction of variously sintered Ni-SDC cermets using focused ion beam scanning electron microscopy nanotomography

Kapun, Gregor (avtor), Majorovits, Endre (avtor), Šturm, Sašo (avtor), Marinšek, Marjan (avtor), Skalar, Tina (avtor)

This work focuses in-depth on the quantitative relationships between primary first-order microstructural parameters (i.e., volume fractions of various phases and particle size distribution) with the more complex second-order topological features (i.e., connectivity of phases, three-phase boundary length (TPB$_L$), interfacial areas, or tortuosity). As a suitable model material, a cermet nickel/samaria-doped ceria (Ni-SDC) is used as an anode in a solid oxide fuel cell (SOFC). A microstructure description of nano-sized Ni-SDC cermets, fabricated at various sintering conditions from 1100 °C to 1400 °C, was performed using FIB-SEM nanotomography. The samples were serially sectioned employing a fully automated slicing procedure with active drift correction algorithms and an auto-focusing routine to obtain a series of low-loss BSE images. Advanced image processing algorithms were developed and applied directly to image data volume. The microstructural–topological relationships are crucial for the microstructure optimisation and, thus, the improvement of the corresponding electrode performance. Since all grains of individual phases (Ni, SDC, or pores) did not percolate, special attention was given to the visualisation of the so-called active TPB$_L$. Based on the determined microstructure characteristics of the prepared Ni-SDC cermets, including simulations of gas flow and pressure drop, thermal treatment at 1200 °C was recognised as the most appropriate sintering temperature.

• Jezik: Angleški jezik
• Ključne besede: solide oxide fuel cells, cermets, focused ion beam scanning electron microscopy, microstructure, morphology
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FKKT - Fakulteta za kemijo in kemijsko tehnologijo ; NTF - Naravoslovnotehniška fakulteta
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: 19 str.
• Številčenje: Vol. 17, iss. 13, [art.] 3068
• PID: 20.500.12556/RUL-158978
• UDK: 620.1:621.352
• ISSN pri članku: 1996-1944
• DOI: 10.3390/ma17133068
• COBISS.SI-ID: 199842819
• Datum objave v RUL: 26.06.2024

Gradivo je del revije

• Naslov: Materials
• Skrajšan naslov: Materials
• Založnik: Molecular Diversity Preservation International
• ISSN: 1996-1944
• COBISS.SI-ID: 33588485

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: gorivne celice s trdnim elektrolitom, kermeti, vrstični elektronski mikroskop s tehnologijo fokusiranega ionskega sklopa, mikrostruktura, morfologija