Towards improved online dissolution evaluation of Pt-alloy PEMFC electrocatalysts via electrochemical flow cell - ICP-MS setup upgrades

Moriau, Leonard (avtor), Đukić, Tina (avtor), Domin, Vojtech (avtor), Kodym, Roman (avtor), Prokop, Martin (avtor), Bouzek, Karel (avtor), Gatalo, Matija (avtor), Šala, Martin (avtor), Hodnik, Nejc (avtor)

Electrochemical flow cell coupled with an inductively coupled plasma mass spectrometer (EFC-ICP-MS) is a powerful electroanalytical technique to monitor in-situ dissolution of metallic electrocatalysts and to understand mechanism of degradation under operating conditions. Its utilisation has witnessed a notable increase in the electrocatalyst field in the last decade where it has been extensively used to study the stability of platinum group metals (PGMs) under oxygen reduction and oxygen evolution reaction conditions. Online ICP-MS has allowed the scientific and industrial community to optimise the activity and stability of PGMs thanks to a better understanding of the complex metal corrosion processes. Among the different setups, the electrochemical flow cell design is the most common as it is based on a commercially available design. Nonetheless, besides different materials and different electrochemical protocols, the impact of the geometry and various parameters of the setup on the recorded dissolution signal has not been studied until now. Such parameters can influence the results obtained with an EFC-ICP-MS and thus the interpretation of the dissolution mechanism and/or stability assessment. Hereby, we demonstrate that the length of the tubing between the outlet of the cell and the inlet of the ICP-MS impacts the resolution of the PtCo catalyst dissolution peaks. This, in turn, facilitates studies where the detection of extremely low concentrations is necessary, such as under a very narrow potential window. Similarly, a reduced internal volume of the cell restricts Pt redeposition, contributing to a more precise evaluation of stability. These claims were supported by dynamic continuum mechanics modelling of the ion concentration in a model EFC. Finally, we provide guidelines and advice to properly measure dissolution with an electrochemical cell coupled with ICP-MS.

• Jezik: Angleški jezik
• Ključne besede: fuel cell catalyst, Pt-alloys dissolution, online-ICP-MS, electrocatalysis, flow injection analysis
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FKKT - Fakulteta za kemijo in kemijsko tehnologijo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: 12 str.
• Številčenje: Vol. 487, art. 144200
• PID: 20.500.12556/RUL-156285
• UDK: 544.5/.6
• ISSN pri članku: 1873-3859
• DOI: 10.1016/j.electacta.2024.144200
• COBISS.SI-ID: 194167299
• Datum objave v RUL: 17.05.2024

Gradivo je del revije

• Naslov: Electrochimica acta
• Založnik: Elsevier
• ISSN: 1873-3859
• COBISS.SI-ID: 135479555

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: elektrokemija, platina, gorivne celice, elektrokatalizatorji