Elucidating the effects of surface wettability on boiling heat transfer using hydrophilic and hydrophobic surfaces with laser-etched microchannels

Žalec, Domen (avtor), Može, Matic (avtor), Zupančič, Matevž (avtor), Golobič, Iztok (avtor)

This study explores the nuanced interplay between surface wettability and morphology in nucleate boiling heat transfer. Surfaces with identical microstructures but varying wettability are created on copper substrates using laser texturing and a hydrophobic agent. The spacing between laser-etched microchannels is adjusted to achieve different contact angles and percentages of laser-textured areas. Boiling performance is assessed with variations in channel spacing and surface coverage, revealing significant differences between hydrophilic and hydrophobic surfaces. The critical heat flux (CHF) enhancement mechanisms are identified, emphasizing either enhanced liquid replenishment or separate boiling and liquid-supply regions. A critical laser line spacing of 100 μm is determined, where hydrophobic and hydrophilic variants exhibit similar CHF. Interestingly, hydrophilic surfaces show a weak correlation between the heat transfer coefficient (HTC) and contact angle, while hydrophobic surfaces demonstrate a strong correlation. This separation of surface morphology and wettability confirms that lower wettability promotes early nucleate boiling and high HTC, whereas hydrophilic variants contribute to enhanced CHF with lower HTC. These distinctions are most prominent at high coverage with laser-textured areas and diminish as coverage decreases. The findings provide valuable insights into optimizing surface properties for efficient boiling heat transfer applications.

• Jezik: Angleški jezik
• Ključne besede: boiling, heat transfer coefficient, critical heat flux, laser texturing, wettability
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: 17 str.
• Številčenje: Vol. 57, art. 104357
• PID: 20.500.12556/RUL-155721
• UDK: 536.24:66.046.7
• ISSN pri članku: 2214-157X
• DOI: 10.1016/j.csite.2024.104357
• COBISS.SI-ID: 192382467
• Datum objave v RUL: 12.04.2024

ŽALEC, Domen, MOŽE, Matic, ZUPANČIČ, Matevž in GOLOBIČ, Iztok, 2024, Elucidating the effects of surface wettability on boiling heat transfer using hydrophilic and hydrophobic surfaces with laser-etched microchannels. Case studies in thermal engineering [na spletu]. 2024. Vol. 57,  104357. [Dostopano 3 maj 2025]. DOI 10.1016/j.csite.2024.104357. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=155721

Gradivo je del revije

• Naslov: Case studies in thermal engineering
• Založnik: Elsevier
• ISSN: 2214-157X
• COBISS.SI-ID: 519660057

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: vrenje, koeficient toplotne prestopnosti, kritična gostota toplotnega toka, lasersko teksturiranje, omočljivost