Genetic algorithm-based framework for optimization of laser beam path in additive manufacturing

Potočnik, Primož (avtor), Jeromen, Andrej (avtor), Govekar, Edvard (avtor)

In this study, a genetic algorithm-based laser beam (LB) path optimization method is presented to improve laser-based additive manufacturing (LBAM). To emulate the LBAM process, LB irradiation of a thin metal substrate is applied. The LB path generation is formulated as the search for the optimal sequence of LB irradiation into the cells on the substrate that minimizes the fitness function, which is composed of two components, i.e., thermal fitness and process fitness. The thermal fitness is expressed by the average thermal gradient, and a simple thermal model is developed to simulate the effects of laser-induced heat input on the temperature distribution in the substrate. The process fitness regulates the suitability of the proposed LB path for the implementation of the LBAM process. In addition to standardized tool paths (i.e., raster, spiral, etc.), novel LB path generators are proposed to define the initial population of LB path solutions. To implement a genetic algorithm-based LB path optimization, a framework is proposed, and custom initialization, crossover, and mutation operators are developed for application in LBAM. The effectiveness of the proposed approach is demonstrated through a simulation case study aiming to identify LB paths that minimize the fitness function and thus provide more suitable LB path solutions with respect to the defined fitness function. Compared with the traditional trial-and-error LB path formulations, the proposed approach provides an improved and automated method for an efficient laser beam path selection in LBAM.

• Jezik: Angleški jezik
• Ključne besede: additive manufacturing, laser beam path, genetic algorithm, optimization
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: 17 str.
• Številčenje: Vol. 14, iss. 4, art. 410
• PID: 20.500.12556/RUL-155463
• UDK: 621.9.048:510.53
• ISSN pri članku: 2075-4701
• DOI: 10.3390/met14040410
• COBISS.SI-ID: 191234563
• Datum objave v RUL: 03.04.2024

Gradivo je del revije

• Naslov: Metals
• Skrajšan naslov: Metals
• Založnik: MDPI AG
• ISSN: 2075-4701
• COBISS.SI-ID: 15976214

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: aditivna proizvodnja, pot laserskega žarka, genetski algoritem, optimizacija

Projekti

• Financer: ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
• Številka projekta: P2-0241
• Naslov: Sinergetika kompleksnih sistemov in procesov