Multi-performance optimization of the rotary turning operation for environmental and quality indicators

Doan, Tat-Khoa (avtor), Nguyen, Trung Thanh (avtor), Van, An-Le (avtor)

In this investigation, two environmental metrics (the comprehensive energy used (TU) and turning noise (TN)) and a quality metric (surface roughness (SR)) of the rotary turning process for the Ti6Al4V were optimized and reduced using the optimal factors (the inclined angle-i, depth of cut-d, feed-f, and turning speed-V). The TU model was proposed comprising the embodied energy of the insert and lubricant. The method based on the removal effects of criteria (MEREC), an improved quantum-behaved particle swarm optimization algorithm (IQPSO), and TOPSIS were applied to select weight values and the best optimal solution. The machining cost (MC) was proposed in terms of process parameters. The outcomes presented that the optimal values of the i, d, f, and V were 35 deg., 0.30 mm, 0.40 mm/rev., and 190 m/min, respectively, while the TU, SR, TN, and MC were saved by 6.7 %, 22.3 %, 23.5 %, and 8.5 %, respectively. The turning responses were primarily affected by the feed rate and turning speed, respectively. The developed turning process could be employed for machining hard-to-cut alloys. The developed approach could be applied to deal with optimization problems for other machining operations.

• Jezik: Angleški jezik
• Ključne besede: rotary turning, total energy consumption, surface roughness, noise emission, IQPSO
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: Str. 42-54
• Številčenje: Vol. 70, no. 1/2
• PID: 20.500.12556/RUL-154760
• UDK: 621.941
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2023.692
• COBISS.SI-ID: 187205891
• Datum objave v RUL: 29.02.2024

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Večkriterijska optimizacija procesa struženja z gnanim orodjem glede na okoljske in kakovostne kazalnike
• Ključne besede: struženje z gnanim rotacijskim orodjem, celotna raba energije, površinska hrapavost, emisija hrupa, IQPSO