izpis_h1_title_alt

Dynamics of oil–water interface at the beginning of the ultrasonic emulsification process
ID Boček, Žan (Avtor), ID Petkovšek, Martin (Avtor), ID Clark, Samuel J. (Avtor), ID Fezzaa, Kamel (Avtor), ID Dular, Matevž (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (21,77 MB)
MD5: FEC1C815B13340F17D4C8DECA8B4FB39
URLURL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S1350417723003693 Povezava se odpre v novem oknu

Izvleček
A lot of effort has been dedicated in recent years towards understanding the basics of cavitation induced emulsification, mainly in the form of single cavitation bubbles. Regarding bulk acoustic emulsification, a lot less research has been done. In our here presented work we utilize advanced high-speed observation techniques in visible light and X-rays to build upon that knowledge and advance the understanding of bulk emulsion preparation. During research we discovered that emulsion formation has an acute impact on the behavior of the interface and more importantly on its position relative to the horn, hence their interdependence must be carefully studied. We did this by observing bulk emulsification with 2 cameras simultaneously and corroborating these measurements with observation under X-rays. Since the ultrasonic horns location also influences interface behavior, we shifted its initial position to different locations nearer to and further away from the oil–water interface in both phases. We found that a few millimeters distance between the horn and interface is not enough for fine emulsion formation, but that they must be completely adjacent to each other, with the horn being located inside the oil–water interface. We also observed some previously undiscovered phenomena, such as the splitting of the interface to preserve continuous emulsion formation, climbing of the interface up the horn and circular interface protrusions towards the horn forming vertical emulsion streams. Interestingly, no visible W/O emulsion was ever formed during our experiments, only O/W regardless of initial horn position.

Jezik:Angleški jezik
Ključne besede:cavitation, emulsion, high speed video, X-ray visualization
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2023
Št. strani:20 str.
Številčenje:Vol. 101, art. 106657
PID:20.500.12556/RUL-152097-c80b01fa-0e44-bb43-24c4-ae629f639265 Povezava se odpre v novem oknu
UDK:532.528
ISSN pri članku:1350-4177
DOI:10.1016/j.ultsonch.2023.106657 Povezava se odpre v novem oknu
COBISS.SI-ID:170581251 Povezava se odpre v novem oknu
Datum objave v RUL:02.11.2023
Število ogledov:901
Število prenosov:60
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Ultrasonics Sonochemistry
Skrajšan naslov:Ultrason. sonochem.
Založnik:Butterworth-Heinemann, Elsevier Science
ISSN:1350-4177
COBISS.SI-ID:707668 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:kavitacija, emulzija, visokohitrostni video, vizualizacija z rentgenskimi žarki

Projekti

Financer:EC - European Commission
Program financ.:H2020
Številka projekta:771567
Naslov:An investigation of the mechanisms at the interaction between cavitation bubbles and contaminants
Akronim:CABUM

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0401
Naslov:Energetsko strojništvo

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0422
Naslov:Funkcionalne tekočine za napredne energetske sisteme

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:J2-3044
Naslov:Kontroliranje ekstremnih kavitacijskih pogojev z lasersko funkcionalizacijo površin (eCATS)

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:J2-3057
Naslov:Kontrolirano generiranje mikromehurčkov in raziskave njihove fizike za uporabo v kemiji, biologiji in medicini

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:J2-4480
Naslov:Odstranjevanje izbranih protimikrobnih učinkovin s hibridno kavitacijsko-plazemsko tehnologijo iz vodnih matric različnih kompleksnosti (Causma)

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj