izpis_h1_title_alt

Experimental study and numerical analysis on windage power loss characteristics of aviation spiral bevel gear with oil injection lubrication
ID Li, Linlin (Avtor), ID Wang, Sanmin (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (3,74 MB)
MD5: 9A8A8132A2E8FD727B43773A1E304541
URLURL - Izvorni URL, za dostop obiščite https://www.sv-jme.eu/sl/article/experimental-study-and-numerical-analysis-on-windage-power-loss-characteristics-of-aviation-spiral-bevel-gear-with-oil-injection/ Povezava se odpre v novem oknu

Izvleček
With the increasing speed of aviation spiral bevel gears, the load-independent windage power losses caused by hydrodynamic have increasingly more influence on gear transmission efficiency. Firstly, a test rig for the windage power loss of spiral bevel gear under oil-jet lubrication is established, and on this basis, a method for measuring windage torque is proposed. Next, the interactive effects of different injection lubrication parameters on the windage power loss were studied by orthogonal experiment, and the formula for calculating the windage loss was obtained by fitting the experimental data. Then, the fluid distribution, velocity field and pressure field around the gear were analysed by using a computational fluid dynamics (CFD) numerical model, and the mechanical and energy characteristics of the gear windage power loss were obtained. Finally, the dimensionless processing of the windage moment was carried out, and the variation of the dimensionless windage moment coefficient with the rotational Reynolds number is obtained. The comparison between the dimensionless windage moment coefficient of experimental data and simulation results shows that the CFD values are in good agreement with the measured data. This study provides experimental and methodological guidance for the calculation of windage power loss and windage reduction design of aviation gear pair under oil injection lubrication.

Jezik:Angleški jezik
Ključne besede:spiral bevel gear, oil-jet lubrication, windage power loss, windage test
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2023
Št. strani:Str. 235-247
Številčenje:Vol. 69, no. 5/6
PID:20.500.12556/RUL-146676 Povezava se odpre v novem oknu
UDK:519.62:621.8
ISSN pri članku:0039-2480
DOI:10.5545/sv-jme.2023.558 Povezava se odpre v novem oknu
COBISS.SI-ID:154643203 Povezava se odpre v novem oknu
Datum objave v RUL:06.06.2023
Število ogledov:434
Število prenosov:85
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:0039-2480
COBISS.SI-ID:762116 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Eksperimentalna študija in numerična analiza izgub moči zaradi ventiliranja pri letalskih stožčastih zobniških prenosnikih s spiralnimi zobmi, mazanih z vbrizgavanjem olja
Ključne besede:stožčasti zobniki, mazanje z oljnim curkom, izgube zaradi ventiliranja, preizkus ventiliranja

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj