izpis_h1_title_alt

Effects of single/compound pit texture on the friction-induced vibration and noise of thrust cylindrical roller bearings
ID Wang, Yueyong (Avtor), ID Zhang, Yimin (Avtor), ID Wang, Yibing (Avtor), ID Long, Risheng (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (4,05 MB)
MD5: 82F6C4E4A206615B7903D2D6F11D9AA6
URLURL - Izvorni URL, za dostop obiščite https://www.sv-jme.eu/sl/article/effects-of-singlecompound-pit-texture-on-friction-induced-vibration-and-noise-of-thrust-cylindrical-roller-bearings/ Povezava se odpre v novem oknu

Izvleček
To improve the reliability and service life of thrust cylindrical roller bearings (TCRBs), the effects of single/compound pit texture on tribological properties and on friction-induced vibration and noise were studied. Laser marking equipment was used to create compound pit texture on a shaft washer. A universal friction and wear test rig was used to measure the friction force, vibration acceleration, and noise signals of TCRBs. The differences between the single/composite pit-textured and non-textured surfaces were studied in terms of the friction, wear, and vibration noise properties. The results revealed that the friction force and wear loss of the single/composite pit-textured surface were markedly lower than those of the non-textured surface. Compared to non-textured surface bearings, the friction force and wear loss for textured surface bearings were reduced by 39.6 % and 59.6 %, respectively, when the diameter, depth, and area density of the pit were 300 μm, 10 μm, and 10 %, respectively. The single/composite pit-textured surface exhibited good potential for vibration absorption and noise suppression. It could effectively interfere with the self-excited vibration of the TCRBs friction pair system, thereby reducing the degree of vibration noise of the TCRBs.

Jezik:Angleški jezik
Ključne besede:thrust cylindrical roller bearings, single pit texture, compound pit texture, friction force, wear, friction-induced vibration, noise
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2023
Št. strani:Str. 87-99
Številčenje:Vol. 69, no. 3/4
PID:20.500.12556/RUL-145151 Povezava se odpre v novem oknu
UDK:621.8
ISSN pri članku:0039-2480
DOI:10.5545/sv-jme.2022.455 Povezava se odpre v novem oknu
COBISS.SI-ID:148326659 Povezava se odpre v novem oknu
Datum objave v RUL:11.04.2023
Število ogledov:1027
Število prenosov:67
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:0039-2480
COBISS.SI-ID:762116 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Vpliv enostavne/sestavljene jamičaste teksture na vibracije in hrup zaradi trenja pri valjčnih aksialnih ležajih
Ključne besede:valjčni aksialni ležaj, enostavna teksturirana površina, sestavljena teksturirana površina, torna sila, obraba, vibracije, hrup zaradi trenja

Projekti

Financer:Drugi - Drug financer ali več financerjev
Program financ.:National Key R&D Program of China
Številka projekta:2019YFB2004400

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Chinese National Natural Science Foundation
Številka projekta:U1708254

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj