izpis_h1_title_alt

Identification of air leakage in a household heat pump tumble dryer
ID Gatarić, Pero (Avtor), ID Širok, Brane (Avtor), ID Gostiša, Jurij (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,70 MB)
MD5: E60BB631FA735C9F02B9E91CE53F444F
URLURL - Izvorni URL, za dostop obiščite https://www.tandfonline.com/doi/full/10.1080/07373937.2022.2073596 Povezava se odpre v novem oknu

Izvleček
Leakage of air in tumble dryers is an important parameter regarding the energy efficiency of the drying process. In general, tumble dryers are prone to leakage, therefore further investigation and optimization in this field is of great interest. This study investigates and quantifies leakage of air within the closed-loop system of an in-situ household heat pump tumble dryer. Each potential leakage location was characterized by leakage curve obtained either by isolated or cumulative measurements using system pressurization method. Based on the static pressure distribution within the closed-loop system, the leakage outflow and inflow were quantified. The leakage of air at the rear and front drum seal was evaluated with and without drum movement. The results indicated the highest leakage outflow rate at the heat pump housing, which represents 12,6% of the total drying air flow rate within the closed-loop system. Sealing heat pump housing improved the condensation efficiency from B to A class according to the IEC 61121.

Jezik:Angleški jezik
Ključne besede:heat pumps, tumble dryers, leakage, energy efficiency, condensation efficiency
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2022
Št. strani:Str. 3622–3630
Številčenje:Vol. 40, no. 16
PID:20.500.12556/RUL-143671 Povezava se odpre v novem oknu
UDK:621.577:648.336
ISSN pri članku:0737-3937
DOI:10.1080/07373937.2022.2073596 Povezava se odpre v novem oknu
COBISS.SI-ID:108705027 Povezava se odpre v novem oknu
Datum objave v RUL:06.01.2023
Število ogledov:702
Število prenosov:76
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Drying technology
Skrajšan naslov:Dry. technol.
Založnik:Taylor & Francis
ISSN:0737-3937
COBISS.SI-ID:5922823 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
Opis:Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:sušilni stroji, toplotne črpalke, netesnost, energetska učinkovitost, merilne metode

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0401
Naslov:Energetsko strojništvo

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj