An investigation on the potential of bio-based polymers for use in polymer gear transmissions

Zorko, Damijan (avtor), Demšar, Ivan (avtor), Tavčar, Jože (avtor)

The potential for replacing the fossil-based Polyoxymethylene (POM) and Polyamide 66 (PA 66) in polymer gear applications with a bio-based Polyamide 6.10 (PA 6.10) was studied and is presented in the article. The use of bio-based plastics is increasing but mostly in undemanding applications like packaging. High-performance plastics are needed in polymer gear transmissions since their operational conditions are far more severe. The potential of bio-based PA 6.10 was studied by means of gear lifespan testing. Additional insights into the process of polymer gear meshing were garnered by simulating all the tested cases with a FEM model of meshing gears. Test gears were manufactured from commercially available materials, making the results useful for gear designers. Encouraging results were observed since the PA 6.10 gears exhibited a 3.5-times longer lifespan than POM gears and a 10-times longer lifespan than PA 66 gears when tested under identical test conditions. The results indicate great potential for replacing fossil-based plastics in polymer gear applications with bio-based polymer materials. The fatigue strength, coefficient of friction, and wear coefficient were determined and compared for the tested materials, facilitating the reliable design of polymer gears.

• Jezik: Angleški jezik
• Ključne besede: biopolymers, gears, testing, simulations, wear, fatigue
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: 13 str.
• Številčenje: Vol. 93, art. 106994
• PID: 20.500.12556/RUL-138439
• UDK: 004.942:621.83:577.11(045)
• ISSN pri članku: 0142-9418
• DOI: 10.1016/j.polymertesting.2020.106994
• COBISS.SI-ID: 43121667
• Datum objave v RUL: 20.07.2022

Gradivo je del revije

• Naslov: Polymer testing
• Skrajšan naslov: Polym. test.
• Založnik: Applied Science Publishers Ltd
• ISSN: 0142-9418
• COBISS.SI-ID: 26155008

Licence

• Licenca: CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
• Opis: Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: biopolimeri, zobniki, testiranje, simulacije, obraba, utrujanje