Pulse-on-demand laser operation from nanosecond to femtosecond pulses and its application for high-speed processing

Petelin, Jaka (avtor), Černe, Luka (avtor), Mur, Jaka (avtor), Agrež, Vid (avtor), Kočica, Jernej Jan (avtor), Schille, Jörg (avtor), Loeschner, Udo (avtor), Petkovšek, Rok (avtor)

In this manuscript we present a true pulse-on-demand laser design concept using two different approaches. First, we present a fiber master oscillator power amplifier (MOPA) based quasi-continuous wave (CW) laser, working at high modulation bandwidths, for generation of nanosecond pulses. Second, we present a hybrid chirped pulse amplification (CPA)-based laser, combining a chirped-pulse fiber amplifier and an additional solid-state amplifier, for generation of femtosecond pulses. The pulse-on-demand operation is achieved without an external optical modulator/shutter at high-average powers and flexible repetition rates up to 40 MHz, using two variants of the approach for near-constant gain in the amplifier chain. The idler and marker seed sources are combined in the amplifier stages and separated at the out using either wavelength-based separation or second harmonic generation (SHG)-generation-based separation. The nanosecond laser source is further applied to high throughput processing of thin film materials. The laser is combined with a resonant scanner, using the intrinsic pulse-on-demand operation to compensate the scanner%s sinusoidal movement. We applied the setup to processing of indium tin oxide (ITO) and metallic films on flexible substrates.

• Jezik: Angleški jezik
• Ključne besede: arbitrary repetition rate, fiber lasers, gain control, high speed processing, pulse-on-demand
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Datum objave: 14.07.2021
• Leto izida: 2021
• Št. strani: 10 str.
• Številčenje: Vol. 10, iss. 4/5
• PID: 20.500.12556/RUL-138101
• UDK: 621.7.015:621.375.826
• ISSN pri članku: 2192-8576
• DOI: 10.1515/aot-2021-0020
• COBISS.SI-ID: 74192131
• Datum objave v RUL: 11.07.2022

PETELIN, Jaka, ČERNE, Luka, MUR, Jaka, AGREŽ, Vid, KOČICA, Jernej Jan, SCHILLE, Jörg, LOESCHNER, Udo in PETKOVŠEK, Rok, 2021, Pulse-on-demand laser operation from nanosecond to femtosecond pulses and its application for high-speed processing. Advanced optical technologies [na spletu]. 2021. Vol. 10, no. 4/5. [Dostopano 11 april 2025]. DOI 10.1515/aot-2021-0020. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=138101

Gradivo je del revije

• Naslov: Advanced optical technologies
• Založnik: de Gruyter
• ISSN: 2192-8576
• COBISS.SI-ID: 522770201

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 14.07.2021

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: poljubna ponavljalna frekvenca, vlakenski laserji, kontrola ojačenja, hitro procesiranje, blisk na zahtevo

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0270
• Naslov: Proizvodni sistemi, laserske tehnologije in spajanje materialov

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: L2-9240
• Naslov: Ultrakratki laserski pulzi na zahtevo