Design of multi standard near field communication outphasing transmitter with modulation wave shaping

Korošak, Žiga (avtor), Suhadolnik, Nejc (avtor), Pleteršek, Anton (avtor)

The aim of this work is to tackle the problem of modulation wave shaping in the field of near field communication (NFC) radio frequency identification (RFID). For this purpose, a highefficiency transmitter circuit was developed to comply with the strict requirements of the newest EMVCo and NFC Forum specifications for pulse shapes. The proposed circuit uses an outphasing modulator that is based on a digital-to-time converter (DTC). The DTC based outphasing modulator supports amplitude shift keying (ASK) modulation, operates at four times the 13.56 MHz carrier frequency and is made fully differential in order to remove the parasitic phase modulation components. The accompanying transmitter logic includes lookup tables with programmable modulation pulse wave shapes. The modulator solution uses a 64-cell tapped current controlled fully differential delay locked loop (DLL), which produces a 360° delay at 54.24 MHz, and a glitch-free multiplexor to select the individual taps. The outphased output from the modulator is mixed to create an RF pulse width modulated (PWM) output, which drives the antenna. Additionally, this implementation is fully compatible with D-class amplifiers enabling high efficiency. A test circuit of the proposed differential multi-standard reader’s transmitter was simulated in 40 nm CMOS technology. Stricter pulse shape requirements were easily satisfied, while achieving an output linearity of 0.2 bits and maximum power consumption under 7.5 mW.

• Jezik: Angleški jezik
• Ključne besede: RFID, EMVCo, NFC, outphasing, PWM, DLL, TX wave shaping
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FE - Fakulteta za elektrotehniko
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: 17 str.
• Številčenje: Vol. 10, iss. 2, art. 188
• PID: 20.500.12556/RUL-136540
• UDK: 621.3
• ISSN pri članku: 2079-9292
• DOI: 10.3390/electronics10020188
• COBISS.SI-ID: 100798723
• Datum objave v RUL: 10.05.2022

KOROŠAK, Žiga, SUHADOLNIK, Nejc in PLETERŠEK, Anton, 2021, Design of multi standard near field communication outphasing transmitter with modulation wave shaping. Electronics [na spletu]. 2021. Vol. 10, no. 2,  188. [Dostopano 21 april 2025]. DOI 10.3390/electronics10020188. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=136540

Gradivo je del revije

• Naslov: Electronics
• Skrajšan naslov: Electronics
• Založnik: MDPI
• ISSN: 2079-9292
• COBISS.SI-ID: 523068953

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 15.01.2021

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: radiofrekvenčna identifikacija, EMVCo, pulzno širinska modulacija, zanka z zakasnilno linijo, oblikovanje oddajnih impulzov