izpis_h1_title_alt

Statistical modelling of the fatigue bending strength of Norway spruce wood
ID Klemenc, Jernej (Avtor), ID Fajdiga, Gorazd (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (2,28 MB)
MD5: 744BE4F1D8B5F869A77239CCFACF7B2A
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1996-1944/15/2/536 Povezava se odpre v novem oknu

Izvleček
When wood is used as a structural material, the fact that it is a highly inhomogeneous material, which significantly affects its static and fatigue properties, presents a major challenge to engineers. In this paper, a novel approach to modelling the fatigue-life properties of wood is presented. In the model, the common inverse-power-law relationship between the structural amplitude loads and the corresponding number of load cycles to failure is augmented with the influence of the wood’s mass density, the loading direction and the processing lot. The model is based on the two-parametric conditional Weibull’s probability density function with a constant shape parameter and a scale parameter that is a function of the previously mentioned parameters. The proposed approach was validated using the example of experimental static and fatigue-strength data from spruce beams. It turned out that the newly presented model is capable of adequately replicating the spruce’s S-N curves with a scatter, despite the relatively scarce amount of experimental data, which came from different production lots that were loaded in different directions and had a significant variation in density. Based on the experimental data, the statistical model predicts that the lower density wood has better fatigue strength.

Jezik:Angleški jezik
Ključne besede:spruce wood, wood density, static material characteristics, fatigue strength, Weibull’s probability density function, augmented inverse power law
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
BF - Biotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2022
Št. strani:15 str.
Številčenje:Vol. 15, iss. 2, art. 536
PID:20.500.12556/RUL-134398 Povezava se odpre v novem oknu
UDK:630*8
ISSN pri članku:1996-1944
DOI:10.3390/ma15020536 Povezava se odpre v novem oknu
COBISS.SI-ID:93092867 Povezava se odpre v novem oknu
Datum objave v RUL:13.01.2022
Število ogledov:1062
Število prenosov:189
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Materials
Skrajšan naslov:Materials
Založnik:Molecular Diversity Preservation International
ISSN:1996-1944
COBISS.SI-ID:33588485 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:11.01.2022

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:smrekovina, gostota lesa, statične lastnosti materiala, dinamična trdnost, Weibullova gostota porazdelitve verjetnosti, razširjeni inverzni potenčni zakon

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0182
Naslov:Razvojna vrednotenja

Financer:Drugi - Drug financer ali več financerjev
Številka projekta:OP20.03520
Naslov:Wood Products over a Lifetime
Akronim:WOOLF

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj