izpis_h1_title_alt

Utilization of Er:YAG laser in retrieving and reusing of lithium disilicate and zirconia monolithic crowns in natural teeth : an in vitro study
ID Grzech-Leśniak, Kinga (Avtor), ID Bencharit, Sompop (Avtor), ID Skrjanc, Lenart (Avtor), ID Kanduti, Domen (Avtor), ID Matys, Jacek (Avtor), ID Golob Deeb, Janina (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (3,54 MB)
MD5: F1B0067DB1616A5BBF3CF94003FE3372
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2076-3417/10/12/4357 Povezava se odpre v novem oknu

Izvleček
The study examined the effect of noninvasive crown retrieval/reuse process using an erbium-doped yttrium aluminum garnet laser (Er:YAG). Twenty-six extracted human teeth were prepared for a crown. The crown was milled using lithium disilicate (LD) and zirconia (Z) materials, n = 13 per group, with three for scanning electron microscopy (SEM). The crown was luted using composite resin cement and subjected to a laser retrieval process. After the retrieval process, the crown was cleaned, re-cemented and laser-retrieved two more times, without and with additional tooth reduction mimicking clinical refreshment of dentin. Retrieval time and temperature were analyzed using analysis of variance (ANOVA). Surface changes were observed through SEM. The retrieval times were 267.1 ± 130.43, 220 ± 79.09, 277.1 ± 126.44, 368.4 ± 136.14, 355 ± 159.39, and 419.2 ± 121.36 s for first, second, third LD and Z groups, respectively (p = 0.009). The maximal temperatures were 23.95.1 ± 1.89 °C, 24.86 ± 2.01 °C, 24.17 ± 1.53 °C, 22.88 ± 1.51 °C, 24.03 ± 1.74 °C, and 21.99 ± 1.32 °C for first, second, third LD and Z groups, respectively (p = 0.006). Er:YAG laser crown removal is an effective retrieval tool for all-ceramic crowns. Minimal changes to teeth and crowns were observed following laser irradiation.

Jezik:Angleški jezik
Ključne besede:crown removal, laser, lithium disilicate, debond, Er:YAG, zirconia
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:MF - Medicinska fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2020
Št. strani:12 str.
Številčenje:Vol. 10, iss. 12, art. 4357
PID:20.500.12556/RUL-133809 Povezava se odpre v novem oknu
UDK:616.31
ISSN pri članku:2076-3417
DOI:10.3390/app10124357 Povezava se odpre v novem oknu
COBISS.SI-ID:64324867 Povezava se odpre v novem oknu
Datum objave v RUL:16.12.2021
Število ogledov:1488
Število prenosov:181
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Applied sciences
Skrajšan naslov:Appl. sci.
Založnik:MDPI
ISSN:2076-3417
COBISS.SI-ID:522979353 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:25.06.2020

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:odstranjevanje krone, laser, litijev disilikat

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj