Electronic emulator of biological tissue as an electrical load during electroporation

Pirc, Eva (avtor), Balosetti, Bertrand (avtor), Miklavčič, Damijan (avtor), Reberšek, Matej (avtor)

Electroporation is an emerging technology, with great potential in many different medical and biotechnological applications, food engineering and biomass processing. Large variations of biological load characteristics, however, represent a great challenge in electroporator design, which results in different solutions. Because a clinical electroporator is a medical device, it must comply with medical device regulative and standards. However, none of the existing standards directly address the operation or electroporator’s performance requirements. In order to evaluate clinical, laboratory and prototype electroporation devices during the development process, or to evaluate their final performance considering at least from the perspective of output pulse parameters, we present a case study on the design of an electronic emulator of biological tissue as an electrical load during electroporation. The proposed electronic load emulator is a proof of concept, which enables constant and sustainable testing and unbiased comparison of different electroporators’ operations. We developed an analog electrical circuit that has equivalent impedance to the beef liver tissue in combination with needle electrodes, during high voltage pulse delivery and/or electroporation. Current and voltage measurements during electroporation of beef liver tissue ex vivo, were analyzed and parametrized to define the analog circuit equation. An equivalent circuit was simulated, built and validated. The proposed concept of an electronic load emulator can be used for “classical” electroporator (i.e., not nanosecond) performance evaluation and comparison of their operation. Additionally, it facilitates standard implementation regarding the testing protocol and enables quality assurance.

• Jezik: Angleški jezik
• Ključne besede: electroporation, tissue conductivity change, standard nonlinear load, biological load, electroporation emulator
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FE - Fakulteta za elektrotehniko
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2020
• Št. strani: 15 str.
• Številčenje: Vol. 10, iss. 9, art. 3103
• PID: 20.500.12556/RUL-133368
• UDK: 602.621
• ISSN pri članku: 2076-3417
• DOI: 10.3390/app10093103
• COBISS.SI-ID: 13261059
• Datum objave v RUL: 24.11.2021

PIRC, Eva, BALOSETTI, Bertrand, MIKLAVČIČ, Damijan in REBERŠEK, Matej, 2020, Electronic emulator of biological tissue as an electrical load during electroporation. Applied sciences [na spletu]. 2020. Vol. 10, no. 9,  3103. [Dostopano 4 maj 2025]. DOI 10.3390/app10093103. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=133368

Gradivo je del revije

• Naslov: Applied sciences
• Skrajšan naslov: Appl. sci.
• Založnik: MDPI
• ISSN: 2076-3417
• COBISS.SI-ID: 522979353

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 01.05.2020

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: elektroporacija, sprememba prevodnosti tkiva, standardno nelinearno breme, biološko breme, emulator elektroporacije