izpis_h1_title_alt

Advanced Structural, chemical and electrochemical characterization of sodium layered cathode
ID Destarkeet, Valentine (Avtor), ID Gaberšček, Miran (Mentor) Več o mentorju... Povezava se odpre v novem oknu

Gradivo nima datotek.

Izvleček
Ta raziskovalni projekt je bil osredotočen na natrijeve okside kot katodne materiale za Na-ionske baterije. Pravzaprav imajo veliko prednosti, vendar se zaradi svoje nestabilnosti v atmosferskih razmerah ne uporabljajo široko. Glavni cilj teme je bil stabilizacija tega gradiva. Primerjali smo dva procesa sinteze za NaNi0,5Mn0,5O2. Klasična metoda je dala dobre rezultate, vendar je nova sintezna pot pod suhim zrakom pokazala material z veliko bolj zanimivimi lastnostmi glede cikličnosti in potenciala, tudi če bi bilo treba zmogljivost še povečati. Stabilnosti obeh vzorcev v zunanjem zraku je sledila rentgenska difrakcija. Ugotovljeno je bilo, da sinteza suhega zraka omogoča pridobivanje zračno stabilne spojine brez strukturne degradacije. Raziskane so bile elektrokemijske lastnosti pri visokem potencialu vzorca suhega zraka in ugotovljeno je bilo, da je pri 4,2 V udeležba redoks -reakcije kisika omogočila doseči kapaciteto 210 mAh/g. Kljub temu po nekaj ciklih ta pojav izgine in zmogljivost spet zbledi na 95 mAh/g. Stabilizacija tega pojava je bila raziskana zahvaljujoč sodelovanju z Umicorejem z vnosom cinka v material.

Jezik:Slovenski jezik
Ključne besede:Na-ionske baterije, večplastni oksid, zračna stabilnost, anionski redoks
Vrsta gradiva:Magistrsko delo/naloga
Organizacija:FKKT - Fakulteta za kemijo in kemijsko tehnologijo
Leto izida:2021
PID:20.500.12556/RUL-133336 Povezava se odpre v novem oknu
Datum objave v RUL:23.11.2021
Število ogledov:770
Število prenosov:27
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Sekundarni jezik

Jezik:Angleški jezik
Naslov:Advanced Structural, chemical and electrochemical characterization of sodium layered cathode
Izvleček:
This research project was focused on sodium layered oxides as cathode materials for Na-ion batteries. Actually, they present a lot of advantages, but they are not widely used because of their instability under atmosphere conditions. The stabilization of this material was the main objective of the topic. Two synthesis processes for NaNi0.5Mn0.5O2 have been compared. The classical method gave good results, but the new synthesis path under dry air showed a material with much more interesting properties in terms of cyclability and potential, even if the capacity still needed to be increased. The stability in ambient air of both samples was followed by X-ray diffraction. It has been found out the dry air synthesis allows to get an air-stable compound with no structural degradation. The electrochemical properties at high potential of the dry air sample were investigated, and it has been found out that at 4.2V, the participation of the oxygen redox reaction enabled to reach a capacity of 210 mAh/g. Nevertheless, after a few cycles, this phenomenon disappears and the capacity fades again to 95 mAh/g. The stabilization of this phenomenon has been investigated thanks to the collaboration with Umicore, by the introduction of Zinc within the material.

Ključne besede:Na-ion Batteries, layered oxide, air stability, anionic redox

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj