Fatigue properties of maraging steel after laser peening

Petan, Luca (avtor), Grum, Janez (avtor), Porro, Juan Antonio (avtor), Ocaña, José Luis (avtor), Šturm, Roman (avtor)

Maraging steels are precipitation hardening steels used for highly loaded components in aeronautical and tooling industry. They are subjected to thermomechanical loads and wear, which significantly shorten their service life. Improvements of their surface mechanical properties to overcome such phenomena are of great interest. The purpose of our research was to investigate the influence of pulse density and spot size of a laser shock peening (LSP) process on the surface integrity with the fatigue resistance of X2NiCoMo18-9-5 maraging steel. Surface integrity was analyzed through roughness, residual stress, and microhardness measurements. The tests performed on resonant testing machine confirmed LSP is a promising process for increasing fatigue resistance of a component. Fatigue crack occurs, when the resonance frequency decreases. This moment, when the fatigue crack initiation phase ends and the fatigue crack propagation phase starts, was chosen as the moment of failure. We have proved LSP is a successful method in improving fatigue resistance of maraging steel by appropriate combination of laser spot size and pulse density tested in our research.

• Jezik: Angleški jezik
• Ključne besede: microhardness, residual stresses, resonant fatigue resistance, roughness
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2019
• Št. strani: 17 str.
• Številčenje: Vol. 9, iss. 12, art. 1271
• PID: 20.500.12556/RUL-133110
• UDK: 620.1(045)
• ISSN pri članku: 2075-4701
• DOI: 10.3390/met9121271
• COBISS.SI-ID: 16961819
• Datum objave v RUL: 11.11.2021

PETAN, Luca, GRUM, Janez, PORRO, Juan Antonio, OCAÑA, José Luis in ŠTURM, Roman, 2019, Fatigue properties of maraging steel after laser peening. Metals [na spletu]. 2019. Vol. 9, no. 12,  1271. [Dostopano 7 april 2025]. DOI 10.3390/met9121271. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=133110

Gradivo je del revije

• Naslov: Metals
• Skrajšan naslov: Metals
• Založnik: MDPI AG
• ISSN: 2075-4701
• COBISS.SI-ID: 15976214

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 01.12.2019

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: mikrotrdota, zaostale napetosti, odpornost na resonančno utrujanje, hrapavost

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0270
• Naslov: Proizvodni sistemi, laserske tehnologije in spajanje materialov