Active vibration control of a mechanical servo high-speed fine-blanking press

Liu, Yanxiong (avtor), Shu, Yuwen (avtor), Hu, Wentao (avtor), Zhao, Xinhao (avtor), Xu, Zhicheng (avtor)

The fine-blanking process as an advanced sheet metal forming process has been widely applied in industry. However, specially designed equipment is required for this process. In this paper, a novel mechanical servo high-speed fine-blanking press with the capacity of 3200 kN is proposed, and the vibration control for this machine is researched to achieve the requirement of fine-blanked parts of high dimensional accuracy, since the vibration of the fine-blanking machine will cause the machining displacement error and reduce the machining accuracy. Self-adaptive feed-forward control is used to simulate the active vibration control of the mechanical fine-blanking machine. The vibration control principle of the fine-blanking machine is described, and the control algorithm is established. At the same time, the mechanical vibration model of the fine-blanking machine as the controlled object is established, and the parameters of the excitation input and the mechanical model are obtained by the fine-blanking finite element simulation and the experiments of the vibration measurement of the press. Finally, the numerical simulation and analysis of active vibration control based on MATLAB are carried out. The results show that the control effect is good, and the vibration response is effectively reduced, thus greatly increasing the processing accuracy, saving a significant amount of energy, and reducing the energy consumption and defective rate.

• Jezik: Angleški jezik
• Ključne besede: active vibration control, mechanical vibration model, mechanical servo high-speed fine-blanking presses, self-adaptive feed-forward control
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: Str. 445-457
• Številčenje: Vol. 67, no. 9
• PID: 20.500.12556/RUL-132484
• UDK: 681.5:534.1
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2020.6959
• COBISS.SI-ID: 82544131
• Datum objave v RUL: 27.10.2021

LIU, Yanxiong, SHU, Yuwen, HU, Wentao, ZHAO, Xinhao in XU, Zhicheng, 2021, Active vibration control of a mechanical servo high-speed fine-blanking press. Strojniški vestnik [na spletu]. 2021. Vol. 67, no. 9, p. 445–457. [Dostopano 5 maj 2025]. DOI 10.5545/sv-jme.2020.6959. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=132484

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Aktivni nadzor vibracij pri mehanski visokohitrostni servostiskalnici za natančno štancanje
• Ključne besede: aktivni nadzor vibracij, mehanski model vibracij, visokohitrostne mehanske servostiskalnice, samoadaptivno krmiljenje