Trajectory-tracking control for manipulators based on fuzzy equivalence and a terminal sliding mode

Liu, Youyu (avtor), Li, Yi (avtor), Zhang, Xuyou (avtor), Chen, Bo (avtor)

To suppress the chattering of manipulators under heavy-load operations, a control method called fuzzy equivalence & terminal sliding mode (FETSM) was applied to the trajectory tracking of motion curves for manipulators. Based on the switching term of the equivalent sliding mode (ESM), a fuzzy parameter matrix processed by the simple fuzzy rules was introduced, and the fuzzy switching term was obtained. By summing the fuzzy switching term and the equivalent term of the equivalence and a terminal sliding mode (ETSM), the control law of the FETSM for manipulators was obtained. On this basis, the stability of the system was analysed and the finite arrival time of it was deduced. On the premise of ensuring the stability of the system, the fuzzy rules and membership functions were designed for the fuzzy constants in the fuzzy switching term. Simulation tests show that the proposed FETSM can ensure sufficient trajectory-tracking precision, error convergence speed, and robustness. Compared with the ETSM, the proposed FETSM can reduce the chattering time by 94.75 % on average; compared with the proportion-integral-differential (PID) control method, the maximum chattering amplitude by the FETSM can be reduced by at least 99.21 %. Thus, the proposed FETSM is suitable for those manipulators under heavy-load operations.

• Jezik: Angleški jezik
• Ključne besede: sliding mode control, fuzzy switch terms, chattering, manipulators, trajectory tracking
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: Str. 433-444
• Številčenje: Vol. 67, no. 9
• PID: 20.500.12556/RUL-132479
• UDK: 681.5:658.5
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2021.7220
• COBISS.SI-ID: 82477571
• Datum objave v RUL: 27.10.2021

LIU, Youyu, LI, Yi, ZHANG, Xuyou in CHEN, Bo, 2021, Trajectory-tracking control for manipulators based on fuzzy equivalence and a terminal sliding mode. Strojniški vestnik [na spletu]. 2021. Vol. 67, no. 9, p. 433–444. [Dostopano 7 april 2025]. DOI 10.5545/sv-jme.2021.7220. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=132479

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Sledilno vodenje za manipulatorje na osnovi mehke ekvivalence in terminalnega drsnega režima
• Ključne besede: regulacija drsnega režima, mehki členi za preklapljanje, poskakovanje, manipulatorji, sledenje trajektoriji, hitrost konvergence napake, robustnost