Residual stress and deformation analysis in machining split straight bevel gears

Wang, Bin (avtor), Yan, Chenxiao (avtor), Li, Jubo (avtor), Feng, Peiyao (avtor), Wang, Shuaipu (avtor), Chen, Shuo (avtor), Su, Jianxin (avtor)

In the machining of split straight bevel gears, the stiffness changes and internal stress are redistributed, which leads to serious deformation of the gear blank after machining. To rectify this problem, q finite element model is established by transforming the processing information of the gear blank into the finite element simulation calculation information, and the gear machining simulation of split straight bevel gear is carried out. Considering the material, design, and machining process of the gear blank, the characteristics and laws of internal stress variation during the gear machining are studied, and the internal mechanism and deformation law of split straight bevel gear are explored. Finally, the gear machining experiment, and the gear blank measurement are carried out. The results show that the deformation law of simulation is consistent with that of the experiment and the deformation characteristics of the split straight bevel gear are consistent with the change law of initial residual stress.

• Jezik: Angleški jezik
• Ključne besede: split straight bevel gear, residual stress, machining deformation, finite element model, deformation measurement
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: Str.114-122
• Številčenje: Vol. 67, no. 3
• PID: 20.500.12556/RUL-128200
• UDK: 539.37:621.833
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2020.7064
• COBISS.SI-ID: 69382147
• Datum objave v RUL: 06.07.2021

WANG, Bin, YAN, Chenxiao, LI, Jubo, FENG, Peiyao, WANG, Shuaipu, CHEN, Shuo in SU, Jianxin, 2021, Residual stress and deformation analysis in machining split straight bevel gears. Strojniški vestnik [na spletu]. 2021. Vol. 67, no. 3, p. 114–122. [Dostopano 7 april 2025]. DOI 10.5545/sv-jme.2020.7064. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=128200

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Analiza preostalih napetosti in deformacije po obdelavi segmenta stožčastega zobnika z ravnimi zobmi
• Ključne besede: segment stožčastega zobnika, zobnik z ravnimi zobmi, preostale napetosti, deformacija po obdelavi, model s končnimi elementi, simulacija obdelave, meritev deformacije

Projekti

• Financer: Drugi - Drug financer ali več financerjev
• Program financ.: National Natural Science Foundation of China
• Številka projekta: 51775171