Characterization of a custom-made digital light processing stereolithographic printer based on a slanted groove micromixer geometry

Valentinčič, Joško (avtor), Prijatelj, Miha (avtor), Jerman, Marko (avtor), Lebar, Andrej (avtor), Sabotin, Izidor (avtor)

A custom-made stereolithographic printer using a digital light processing optical (DLP) system based on a digital micromirror device (DMD) was characterized. Several sizes of slanted grooved micromixers (SGM) were produced and typical dimensions were measured and compared to nominal values. The results show that developed SLA printer is precise enough to be used for prototyping of larger microfluidic devices. The lateral geometries of the smallest printed micromixer designs deviated less than 20 um from the nominal values and related feature depths deviated for less than 15 um. However, further modifications are needed in order to improve the repeatability, accuracy and printing resolution.

• Jezik: Angleški jezik
• Ključne besede: DLP stereolithography, 3D printers characterizations, micromixers, digital light processing
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2020
• Št. strani: Str. 1-6
• Številčenje: Vol. 8, art. JMNM-19-1073
• PID: 20.500.12556/RUL-127110
• UDK: 004.356.2(045)
• ISSN pri članku: 2166-0468
• DOI: 10.1115/1.4046044
• COBISS.SI-ID: 17038363
• Datum objave v RUL: 18.05.2021

VALENTINČIČ, Joško, PRIJATELJ, Miha, JERMAN, Marko, LEBAR, Andrej in SABOTIN, Izidor, 2020, Characterization of a custom-made digital light processing stereolithographic printer based on a slanted groove micromixer geometry. Journal of micro- and nano-manufacturing [na spletu]. 2020. Vol. 8,  JMNM-19–1073, p. 1–6. [Dostopano 7 april 2025]. DOI 10.1115/1.4046044. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=127110

Gradivo je del revije

• Naslov: Journal of micro- and nano-manufacturing
• Skrajšan naslov: J. micro- nano-manuf.
• Založnik: ASME
• ISSN: 2166-0468
• COBISS.SI-ID: 14979611

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 01.03.2020

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: DLP stereolitografija, karakterizacija 3D tiskalniki, mikromešalniki, digitalno procesiranje svetlobe

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0248
• Naslov: Inovativni izdelovalni sistemi in procesi

• Financer: EC - European Commission
• Program financ.: H2020
• Številka projekta: 811040
• Naslov: Chair Of Micro Process Engineering and TEchnology
• Akronim: COMPETE