Epoxy-bonded La-Fe-Co-Si magnetocaloric plates

Pulko, Barbara (avtor), Tušek, Jaka (avtor), Moore, James D. (avtor), Weise, Bruno (avtor), Skokov, Konstantin (avtor), Mityashkin, Oleg (avtor), Kitanovski, Andrej (avtor), Favero, Chiara (avtor), Fajfar, Peter (avtor), Gutfleisch, Oliver (avtor), Waske, Anja (avtor), Poredoš, Alojz (avtor)

We report the processing, analysis and testing of magnetocaloric composite materials consisting of La-Fe-Co-Si particles of various size fractions and a polymer matrix. All of the composites have working temperatures close to room temperature. The composites were pressed into thin plates, a geometry favorable for testing the composites in an active magnetic regenerator (AMR). In order to investigate the influence of particle size and binder type (epoxy), eight different epoxy-bonded La-Fe-Co-Si plates were made and analyzed. We found that the higher filling factor that can be achieved by using a mixture of several particle size fractions has beneficial influence on the thermal conductivity. Tests in the AMR revealed that a maximum temperature span of approximately T=10 K under magnetic field change of 0H=1.15 T can be obtained at no cooling load conditions. The stability of the measured T values and the mechanical integrity of sample after cyclic application of a magnetic field have been monitored for 90,000 cycles and showed no significant changes. We therefore conclude that epoxy-bonded La-Fe-Co-Si magnetocaloric composites have good magnetocaloric properties at low material-processing costs and hence represent a competitive way to produce magnetocaloric materials to be used in AMR.

• Jezik: Angleški jezik
• Ključne besede: magnetocaloric effect, magnetic refrigeration, La-Fe-Co-Si, active magnetic regenerator, epoxy
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Recenzirani rokopis
• Leto izida: 2015
• Št. strani: Str. 65-73
• Številčenje: Vol. 375
• PID: 20.500.12556/RUL-126300
• UDK: 621.565.8:697.97:620.1(045)
• ISSN pri članku: 0304-8853
• DOI: 10.1016/j.jmmm.2014.08.074
• COBISS.SI-ID: 13703963
• Datum objave v RUL: 15.04.2021

PULKO, Barbara, TUŠEK, Jaka, MOORE, James D., WEISE, Bruno, SKOKOV, Konstantin, MITYASHKIN, Oleg, KITANOVSKI, Andrej, FAVERO, Chiara, FAJFAR, Peter, GUTFLEISCH, Oliver, WASKE, Anja in POREDOŠ, Alojz, 2015, Epoxy-bonded La-Fe-Co-Si magnetocaloric plates. Journal of Magnetism and Magnetic Materials [na spletu]. 2015. Vol. 375, p. 65–73. [Dostopano 14 april 2025]. DOI 10.1016/j.jmmm.2014.08.074. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=126300

Gradivo je del revije

• Naslov: Journal of Magnetism and Magnetic Materials
• Skrajšan naslov: J. magn. magn. mater.
• Založnik: North-Holland Publishing Co
• ISSN: 0304-8853
• COBISS.SI-ID: 25758720

Licence

• Licenca: CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
• Opis: Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.
• Začetek licenciranja: 15.04.2021

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: magnetokalorični efekt, procesiranje materialov, magnetokalorični material, magnetno hlajenje