Three-dimensional measurements of bodies in motion based on multiple-laser-plane triangulation

Poredoš, Primož (avtor), Povšič, Klemen (avtor), Novak, Boštjan (avtor), Jezeršek, Matija (avtor)

This paper presents laser-based, three-dimensional (3D) measuring applications involving three different bodies in motion: a knee joint during leg motion (1) , thoraco - abdominal and back deformation during breathing (2) and the shape of a foot during walking (3) . The first (1) setup is based on a commercial sensor Kinect, whereas the second (2) and the third (3) are based on custom - developed, multiple - line, triangulation measuring systems. Special attention was given to the color - modulation principle and the selection of the proper optical components. Based on the calibration, the accuracy of the system is 1.4 mm (1), 0.7 mm (2) and 0.5 mm (3 ), while the measuring range is 900 x 700 x 600 mm (1), 400 x 600 x 500 mm (2) and 400 x 160 x 180 mm (3). The camera frame rate for each setup is 30 Hz (1), 25 Hz (2) and 30 Hz (3). All the systems were evaluated in vivo on adult volunteers. The presented measuring systems are capable of real - time measurements , while enabling a precise and nonintrusive analysis of shape deformation, which has a lot of potential in clinical diagnosis, patient assistance or the development of new shoe models.

• Jezik: Angleški jezik
• Ključne besede: laser triangulation, 3D measurement, bodies in motion, color - modulation, shape deformation
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2015
• Št. strani: Str. 53-61
• Številčenje: Vol. 38, N° 2
• PID: 20.500.12556/RUL-125756
• UDK: 004.946:681.518.52(045)
• ISSN pri članku: 0254-0770
• COBISS.SI-ID: 14172955
• Datum objave v RUL: 06.04.2021

POREDOŠ, Primož, POVŠIČ, Klemen, NOVAK, Boštjan in JEZERŠEK, Matija, 2015, Three-dimensional measurements of bodies in motion based on multiple-laser-plane triangulation. Revista técnica de la Facultad de Ingeniería [na spletu]. 2015. Vol. 38, no. N° 2, p. 53–61. [Dostopano 14 april 2025]. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=125756

Gradivo je del revije

• Naslov: Revista técnica de la Facultad de Ingeniería
• Skrajšan naslov: Rev. téc. Fac. Ing., Univ. Zulia
• Založnik: Facultad de Ingeniería
• ISSN: 0254-0770
• COBISS.SI-ID: 26288896

Licence

• Licenca: CC BY-NC-SA 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Deljenje pod enakimi pogoji 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc-sa/4.0/deed.sl
• Opis: Licenca Creative Commons, ki prepoveduje komercialno uporabo in zahteva, da uporabnik predelana dela objavi z enako licenco.
• Začetek licenciranja: 06.04.2021

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: laserska triangulacija, 3D meritve, telesa v gibanju, barvna modulacija, deformacija oblike

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: L7-4274
• Naslov: Laserska triangulacija v medicini (LASTRIM)