Rheological behaviour of highly filled materials for injection moulding and additive manufacturing : effect of particle material and loading

Bek, Marko (avtor), Gonzalez-Gutierrez, Joamin (avtor), Kukla, Christian (avtor), Pušnik Črešnar, Klementina (avtor), Maroh, Boris (avtor), Slemenik Perše, Lidija (avtor)

Within this paper, we are dealing with a mixture of thermoplastic polymer that is filled with inorganic fillers at high concentrations up to 60 vol.%. A high number of particles in the compound can substantially change the rheological behaviour of the composite and can lead to problems during processing in the molten state. The rheological behaviour of highly filled materials is complex and influenced by many interrelated factors. In the present investigation, we considered four different spherical materials: steel, aluminium alloy, titanium alloy and glass. Particles with similar particle size distribution were mixed with a binder system at different filling grades (30–60 vol.%). We showed that the rheological behaviour of highly filled materials is significantly dependent on the chemical interactions between the filler and matrix material. Moreover, it was shown that the changes of the particle shape and size during processing lead to unexpected rheological behaviour of composite materials as it was observed in the composites filled with glass beads that broke at high contents during processing.

• Jezik: Angleški jezik
• Ključne besede: highly filled materials, polypropylene binder, binder-filler interaction, particle-particle interaction, shear rheology, fused filament fabrication, ATR-FTIR, XPS
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2020
• Št. strani: 23 str.
• Številčenje: Vol. 10, iss. 22, art. 7993
• PID: 20.500.12556/RUL-122938
• UDK: 678.742.3
• ISSN pri članku: 2076-3417
• DOI: 10.3390/app10227993
• COBISS.SI-ID: 38860291
• Datum objave v RUL: 17.12.2020

BEK, Marko, GONZALEZ-GUTIERREZ, Joamin, KUKLA, Christian, PUŠNIK ČREŠNAR, Klementina, MAROH, Boris in SLEMENIK PERŠE, Lidija, 2020, Rheological behaviour of highly filled materials for injection moulding and additive manufacturing : effect of particle material and loading. Applied sciences [na spletu]. 2020. Vol. 10, no. 22,  7993. [Dostopano 4 maj 2025]. DOI 10.3390/app10227993. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=122938

Gradivo je del revije

• Naslov: Applied sciences
• Skrajšan naslov: Appl. sci.
• Založnik: MDPI
• ISSN: 2076-3417
• COBISS.SI-ID: 522979353

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 11.11.2020

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: materiali z visokim deležem polnitve, vezivni sistem, polipropilen, polipropilensko vezivo, interakcija veziva in polnila, ciljno nanašanje slojev