CFD-simulation assisted design of elastocaloric regenerator geometry

Navickaite, Kristina (avtor), Penzel, Michael (avtor), Bahl, Christian Robert Haffenden (avtor), Engelbrecht, Kurt (avtor), Tušek, Jaka (avtor), Martin, André (avtor), Zinecker, Mike (avtor), Schubert, Andreas (avtor)

Elastocaloric cooling is a promising alternative to conventional cooling using the vapour compression cycle, with potentially higher theoretical exergy efficiency. Nevertheless, there is a number of challenges to be tackled before the technology can be commercially available world-wide. In this study, the potential of double corrugated regenerators to enhance the cooling power of an elastocaloric device that would be operating under compression loading was investigated. The numerical performances of two types of double corrugated geometries are presented and compared to a flat plate regenerator as a reference. The double corrugated geometry significantly increases the surface area to volume ratio and convection of the regenerator, which allows an increase in the power density of the device.

• Jezik: Angleški jezik
• Ključne besede: elastocaloric cooling, computational fluid dynamics, regenerator, thermo-hydraulic properties
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2020
• Št. strani: f. 1-16
• Številčenje: Vol. 12, iss. 21
• PID: 20.500.12556/RUL-122208
• UDK: 621.57:519.8(045)
• ISSN pri članku: 2071-1050
• DOI: 10.3390/su12219013
• COBISS.SI-ID: 39799299
• Datum objave v RUL: 27.11.2020

Gradivo je del revije

• Naslov: Sustainability
• Skrajšan naslov: Sustainability
• Založnik: MDPI
• ISSN: 2071-1050
• COBISS.SI-ID: 5324897

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: elastokalorično hlajenje, računalniška dinamika tekočin, regenerator, termo-hidravlične lastnosti