izpis_h1_title_alt

Formulation of risk-targeted seismic action for the force-based seismic design of structures
ID Žižmond, Jure (Avtor), ID Dolšek, Matjaž (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,75 MB)
MD5: DC896A5B9B8AFFB7148075DE8B7FD4A8

Izvleček
A risk targeted design spectral acceleration and the corresponding seismic design action for the force based design of structures is introduced by means of two formulations. The first one called direct formulation utilizes the seismic hazard function at the site of the structure. Because the seismic action defined in the codes is often associated with a designated return period, an indirect formulation is also introduced. It incorporates a risk targeted safety factor that can be used to define a risk targeted reduction factor. It is shown that the proposed formulations give analogical results and provide an insight into the concept of the reduction of seismic forces for the force based seismic design of structures if the objective is defined by a target collapse risk. The introduced closed form solution for the risk targeted reduction factor can be used to investigate how the target collapse risk, the seismic hazard parameters, the randomness of the seismic action, and the conventional parameters (ie, the overstrength factor and the deformation and energy dissipation capacity) affect the seismic design forces in the case of force based design. However, collaborative research is needed in order to develop appropriate models of these parameters. In the second part of the paper, the proposed formulations are demonstrated by estimating the risk targeted seismic design action for a six storey reinforced concrete building. By verifying the collapse risk of the designed structure, it is demonstrated that the risk targeted seismic action, in conjunction with a conventional force based design, provided structure with acceptable performance when measured in terms of collapse risk.

Jezik:Angleški jezik
Ključne besede:earthquake engineering, structural engineering
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FGG - Fakulteta za gradbeništvo in geodezijo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Poslano v recenzijo:06.01.2019
Datum sprejetja članka:20.04.2019
Datum objave:02.06.2019
Leto izida:2019
Št. strani:Str. 1406-1428
Številčenje:Letn. 48, št. 12
PID:20.500.12556/RUL-114835 Povezava se odpre v novem oknu
UDK:624.042.7
ISSN pri članku:0098-8847
DOI:10.1002/eqe.3206 Povezava se odpre v novem oknu
COBISS.SI-ID:9012577 Povezava se odpre v novem oknu
Datum objave v RUL:18.03.2020
Število ogledov:1369
Število prenosov:209
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Earthquake engineering & structural dynamics
Skrajšan naslov:Earthquake eng. struct. dyn.
Založnik:Wiley
ISSN:0098-8847
COBISS.SI-ID:25358592 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
Opis:Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.
Začetek licenciranja:18.03.2020

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:potresno inženirstvo, gradbene konstrukcije

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj