Green tribology for the sustainable engineering of the future

Kalin, Mitjan (avtor), Polajnar, Marko (avtor), Kus, Maja (avtor), Majdič, Franc (avtor)

Environmental awareness and especially the legislation that requires the reduction of polluting emissions are strong driving forces toward more sustainable engineering and greener solutions in the design, use and overall life span of machinery. However, providing novel concepts that will exclude non-environmentally adapted, but over many years developed and optimized solutions, is not an easy task. It clearly requires time if the same level of technical performance is to be maintained. Green tribology is one of the fields that has been closely involved in these actives in the past two decades. The research and use of tribology science and technology toward green and sustainable engineering include natural material usage, lower energy consumption, reducing natural oil resources, reducing pollution and emissions, fewer maintenance requirements and thus reduced machinery-investment cycles. This report is not an attempt to cover all the existing concepts, attempts or literature available in the field, but mainly those efforts that our group has been working on over the past 20 years, which mainly includes novel green-lubrication concepts that come from exploring and exploiting surface engineering through the use of diamond-like-carbon (DLC) coatings.

• Jezik: Angleški jezik
• Ključne besede: green lubrication, DLC coatings, low SAPS oils, biodegradable oils, nanoparticles, boundary slip, ionic liquids, water lubrication
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2019
• Št. strani: Str. 709-727
• Številčenje: Vol. 65, no. 11/12
• PID: 20.500.12556/RUL-113743
• UDK: 539.92:502.12(045)
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2019.6406
• COBISS.SI-ID: 16945179
• Datum objave v RUL: 30.01.2020

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Okolju prilagojena "zelena" tribologija za trajnostno inženirstvo prihodnosti
• Ključne besede: zeleno mazanje, DLC prevleke, biološko razgradljiva olja, olja z nizkim deležem SAPS aditivov, nanodelci, mejni zdrs, ionske tekočine, vodno mazanje

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Program financ.: Programska skupina
• Številka projekta: P2-0231
• Naslov: Tribologija