Priprava in izvedba projekta pametne hiše na osnovi sistema KNX

URANKAR, SIMON (avtor), Dobrišek, Simon (mentor)

Predmet diplomskega dela je priprava in izvedba projekta pametne hiše na osnovi sistema KNX (standardizirani protokol za kontrolo zgradb). V sklopu projekta pametne hiše so programirana naslednja področja: razsvetljava, senčila in ogrevanje/hlajenje. Varnostni sistem in oddaljeni dostop sta pripravljena v sodelovanju z drugim podjetjem. Celoten projekt je razdeljen na dva dela, in sicer na pripravo v pisarni in implementacijo na terenu. Pri pripravi v pisarni so bili najprej dopolnjeni tlorisi, na podlagi teh je bil v programu ETS5 (program, v katerem se nastavlja, povezuje in programira elemente KNX) izdelan projekt, torej vse povezave med stikali, lučmi, ventili in senčili. Nato so bili na vsak aktuator in druge elemente KNX naloženi podatki o fizičnem naslovu, monterjem je bilo na škatlo označeno, kam je treba elemente montirati. Na koncu sta sledili še dve odpravi na hišo, ki sta obsegali nalaganje programa v sistem, preverjanje delovanja in odpravo napake. Naročnik je pogledal še zadnje podrobnosti in odobril projekt.

• Jezik: Slovenski jezik
• Ključne besede: pametna hiša, KNX, ETS5, oddaljeni dostop, pametni dom
• Vrsta gradiva: Diplomsko delo/naloga
• Organizacija: FE - Fakulteta za elektrotehniko
• Leto izida: 2019
• PID: 20.500.12556/RUL-110887
• Datum objave v RUL: 20.09.2019

URANKAR, SIMON, 2019, Priprava in izvedba projekta pametne hiše na osnovi sistema KNX [na spletu]. Diplomsko delo. [Dostopano 5 maj 2025]. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=110887

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Preparation and implementation of a smart house project based on the KNX system

Izvleček

The subject of the graduation thesis is preparation and implementation of the smart house project, based on KNX system (standarized building control protocol). As part of the smart house project the following areas have been programmed: lighting, blinds and heating/cooling. While security system and remote access has been done in a collaboration with other company. The whole project described is roughly divided into two parts, namely office preparation and field implementation. When preparing in the office, the floor plans had been done first, and a project was build from these in ETS5 (a program in which KNX elements are configured, linked and programmed). So all the connections between switches, lights, valves and blinds had been done in the program. Then the physical address information was uploaded to each actuator and other KNX elements, and the boxes were marked to installers where to mount. Finally, two more expeditions to the house where the program was uploaded into the system followed, and the operation was checked and little errors immediately fixed. The client looked at the latest details and approved the project.

• Ključne besede: smart house, KNX, ETS5, remote access, smart home