Razvoj obuvala namenjenega uporabi po zimski športni aktivnosti

Mlinar, Sonja (avtor), Šajn Gorjanc, Dunja (mentor)

Za zimsko športno obutev in obutev nasploh je pomembno, da je izdelana iz kvalitetnih materialov, ki ne prepuščajo vode, a hkrati dihajo. Za zunanje dele se največkrat uporablja usnje, prevlečene materiale ali laminirane tekstilije. Podloga pa je običajno izdelana iz netkanih ali laminiranih tekstilij ali usnja. Vmesni materiali, namenjeni za ojačenje so pogosto izdelani iz termoplastičnih materialov v obliki tkanin ali vlaknovin. V sklopu diplomske naloge je bilo izdelano enostavno obuvalo, ki je namenjeno nošenju po končani zimski športni aktivnosti. Izbrani so bili štirje premazani materiali, od tega eden z mikroporoznim premazom in snutkovnim pletivom, pet laminatov, od tega trije z mikroporoznim premazom in snutkovnim pletivom ter ena netkana tekstilija. Namen diplomske naloge je ugotoviti, kateri izbrani material ima najbolj primerne lastnosti za zunanji del ali podlogo obuvala, namenjenega uporabi po zimski športni aktivnosti. Najpomembnejše lastnosti, ki jih mora material imeti so dobra pretržna trdnost, odpornost proti drgnjenju, zračna prepustnost, prepustnost vodne pare, toplotna prevodnost in hkrati ne sme prepuščati vode. Pri raziskavi je bilo ugotovljeno, da imajo premazani materiali dobro pretržno trdnost in odpornost proti drgnjenju, ne prepuščajo vode in hkrati ne dihajo. Laminati prav tako kažejo dobro pretržno trdnost in odpornost proti drgnjenju, a tistim, ki vsebujejo mikroporozni premaz, ni bilo mogoče izmeriti zračne prepustnosti. Najslabšo pretržno trdnost in odpornost proti drgnjenju je pokazala netkana tekstilija, ki pa ima dobro zračno prepustnost in prepustnost vodne pare.

• Jezik: Slovenski jezik
• Ključne besede: razvoj športnega obuvala, premazane tekstilije, laminati, netkane tekstilije, mehanske lastnosti
• Vrsta gradiva: Diplomsko delo/naloga
• Organizacija: NTF - Naravoslovnotehniška fakulteta
• Leto izida: 2019
• PID: 20.500.12556/RUL-107499
• Datum objave v RUL: 20.04.2019

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Development of footwear intended for the use after winter sport activities

Izvleček

Generally shoes and footwear for winter sports are important to be made from quality materials that do not leak water but they breathe at the same time. Leather, coated materials or laminated textiles are mostly used for outer parts. The base is usually made of non-woven or laminated textiles or leather. Intermediate reinforcing materials are often made of thermoplastic materials in the form of woven and non-woven textiles. As a part of the bachelor's thesis, simple footwear was designed. It is intended for wearing after the winter sports activity. Four coated materials were selected, one of them with a microporous coating and a warp knit and five laminates and three of them with a microporous coating and warp knit and a non-woven fabric. The purpose of the bachelor's thesis is to determine from the selected materials which have the most suitable characteristics for the outer part or the lining of a footwear intended for use after winter sports activity. The most important properties the materials must have are good tear strength, abrasion resistance, air permeability, water vapor permeability and thermal conductivity. In addition, it must not allow water to leak. The study found that coated materials have good breaking strenght and abrasion resistance. They are water resistant but do not breathe at the same time. Laminate also show good breaking strength and abrasion resistance. However, air permeability cannot be measured for those containing the microporous membrane. Non-woven textiles, which have good air permeability and water vapor permeability showed the worst breaking strength and abrasion resistance.

• Ključne besede: development of sports footwear, coated textiles, laminates, non-woven textiles, mechanical properties