High-speed camera thermometry of laser droplet generation

Bizjan, Benjamin (avtor), Kuznetsov, Alexander (avtor), Jeromen, Andrej (avtor), Govekar, Edvard (avtor), Širok, Brane (avtor)

This paper presents a high-speed thermal imaging method using a visible light camera, with application to the laser droplet generation process (LDG). In the experiment, a nickel wire-end was exposed to a collimated laser beam, and the subsequent process of wire melting, pendant droplet formation and its detachment were recorded by a high speed camera. Instantaneous temperature fields of the metal surface were calculated from the imaging data and were characterized by a very good spatial and temporal resolution (200 x 400 pixels at 13,837 frames per second). The droplet temperature could be accurately calculated between the melting point of nickel (1455 °C) and approximately 1950 °C, where image saturation started to occur. The remaining pendant droplet was shown to cool much more rapidly than the detached droplet, which is due to the heat conduction to the solid wire. Except for the time immediately after the droplet separation, the temperature distribution across the melt droplets was found to be quite uniform. Apart from the possibility of temperature field calculation, it was also demonstrated that the high-speed images of the LDG process can accurately capture contours and oscillation dynamics of melt droplets.

• Jezik: Angleški jezik
• Ključne besede: laser droplet generation, temperature measurement, high-speed camera, melting, droplet detachment, fluid dynamics
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Recenzirani rokopis
• Leto izida: 2017
• Št. strani: Str. 298-305
• Številčenje: Vol. 110
• PID: 20.500.12556/RUL-105932
• UDK: 536.52:681.783.332(045)
• ISSN pri članku: 1359-4311
• DOI: 10.1016/j.applthermaleng.2016.08.182
• COBISS.SI-ID: 14815515
• Datum objave v RUL: 24.12.2018

Gradivo je del revije

• Naslov: Applied thermal engineering
• Skrajšan naslov: Appl. therm. eng.
• Založnik: Elsevier Science
• ISSN: 1359-4311
• COBISS.SI-ID: 1861910

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: laserska tvorba kapljic, merjenje temperature, hitre kamere, taljenje kapljic, ločevanje kapljic, dinamika tekočin

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0241
• Naslov: Sinergetika kompleksnih sistemov in procesov